Rainbow Electronics AT91CAP9S250A - Manual (Page 853)

853
6264A–CAP–21-May-07
AT91CAP9S500A/AT91CAP9S250A
– EPT_ENABL: Enable endpoint.
Configuration examples of Bulk OUT endpoint type follow below.
• With DMA
– AUTO_VALID: Automatically validate the packet and switch to the next bank.
– EPT_ENABL: Enable endpoint.
• Without DMA
– RX_BK_RDY: An interrupt is sent after a new packet has been stored in the endpoint
FIFO.
– EPT_ENABL: Enable endpoint.