ABUS TV3220 - Manual (Page 101)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 101
3. Selecting the timer:
In the next step, select the timer. This can be used to restrict the execution of the process to a
set time. If no timer should be used for the activation, then the standard Always entry must be
used. More information on using timers can be found under point 3.4.8.
4. Selecting the camera / relay:
The input or output of the components to be used is connected in this field. This can be a
camera or relay, or can also be no components. Select the desired components to be used in
the activation from the list.
Note:
A camera should not be selected here when the video output or guard tour process is used, as
the camera has already been defined when the process was created.
5. Connecting the process:
The process is connected to the activation in the process window. Select the process to be
used for the activation here.
6. Connecting the archive / notification:
The final field is used for connecting the archive. If a storage process is selected in the
process field, then the available archives are listed here. If a call process is selected, then the
text messages for the notification are listed.
All components are now connected and the activation is set up.
When several entries are already present in the list of activations, it is recommended to define
a priority for each entry. In this way, important processes are given higher priority when the
system is under extreme load.