ABUS TV3220 - Manual (Page 26)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 26
Host view
All the set hosts are listed in the “Host” view.
In this view, each host has its own slide showing a preview
of the local cameras on the host.
This view is always used to call up a host.
You can find further information on selecting hosts under
point 2.6 on page 42.
2.3 System status indicator
The current system status can be seen with the system status indicator. This is depicted by
four symbols.
These symbols are also located on the front of the ABUS HDVR / NVR housing, and use
LEDs to reflect the current system status.
The symbols are as follows:
Alarm (lights up as soon as an alarm is received (e.g. over an external
detector))
Fault (lights up if a fault occurs (e.g. camera failure))
Maintenance (lights up when maintenance interval is reached)
Recording (lights up as soon as video data is recorded)
The system status always relates to the local system only. It is not possible to display a
remote system status.
2.4 Working with the cameras
Providing they are set up in the system configuration, any cameras connected will be listed in
the Camera view. Each slide shown represents a camera.
The camera type is indicated by the camera symbol on the top right-hand side of the slide.
This can vary as follows: