ABUS TV3220 - Manual (Page 104)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 104
Camera image too dark:
The brightness of the video image is monitored using this detector. The detector triggers
an alarm when a sudden change in brightness is detected. This function also only applies
to cameras where the Coverage function is activated.
Camera position wrong:
The detector for camera anti-swivel protection triggers when the current video image no
longer matches the reference image. This function also only applies to cameras where the
Misplace option is activated in the camera configuration (see point 3.2.4).
... Outgoing call:
Outgoing connections can be monitored using this detector. Activities can then be logged
in an alarm list and evaluated. These detectors are available for TCP/IP, 1. ISDN and 2.
ISDN.
... Incoming call:
Incoming connections can be monitored using this detector. Logging can also be made
over an alarm list here. These detectors are available for TCP/IP, 1. ISDN and 2. ISDN.
... Call rejected:
This detector is triggered when a connection to a host is rejected (e.g. due to missing
authorisation).
Reserved detectors:
Detectors 16, 17, 18 and 23 are reserved for additional functions and cannot be accessed
by the system.
Check Call Error:
This detector is triggered when a check call to a host fails.
Check Call OK:
The Check Call OK detector is triggered at each successful check call. Check calls can
then be logged using an alarm list.