ABUS TV3220 - Manual (Page 33)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 33
2.4.6 Using the sequencer function
The sequencer is used to display all the cameras in the camera list one by one.
It does not matter whether the cameras are in a local or remote system in
this case.
The sequencer can be influenced by changing the image geometry. For example, if you are in the
quadratic view (4, 9, 16, 25 or 36 cameras), all the live image windows are moved upwards line by line
(see graphic). If the height of the view has been set in such a way that all the cameras can be shown
at once, the sequencer swaps the positions of the images.
If 1Plus view is activated, the
cameras in the small windows
are swapped in succession
with the large window.
The default sequencing
interval is 5 seconds.
Note:
Sequencers can only be activated in Live and LivePlus mode. If the software is in Playback
mode, the slider is used to switch between database playback and recording statistics and the
sequencer is deactivated.
2.4.7 Using manual recording (Panic Record)
Activating the Manual recording button ensures that recordings are made from all the currently
activated cameras. This occurs until the button is switched off again or Playback mode is
selected.
It is then possible to watch the recordings in Playback mode.
For each camera that was active during recording, there is now a recording in that period. This
is shown in the recording statistics.
Images moved line by line in quadratic view Image swap when all
the cameras are
displayed in a high
view
Image swap when all
the cameras are
displayed in 1Plus view
Manual recording On Manual recording Off