ABUS TV3220 - Manual (Page 128)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 128
3.8 Miscellaneous settings
The Miscellaneous view contains all settings which could not be grouped under the other
system views but remain important for configuring the software.
These points are described in more detail below.
3.8.1 Multi-monitor operation
The ABUS VMS software is intended for operation with up to four monitors. The use of more
than one monitor is dependent on the successful configuration of the Windows display settings
(dual-head, quad-head). Consult Windows Help if you experience problems during the
configuration.
Multi-monitor operation can be switched on under Miscellaneous

Multi-Monitor following
successful Windows set-up in the system configuration. The corresponding boxes must be
checked for each of the monitors to be used. The settings must then be saved and the system
restarted.
Configuration of the monitors
System configuration display on
monitor XY