ABUS TV3220 - Manual (Page 147)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 147
- Name: Alarm archive filled 100%; Text: The alarm archive is 100% full.
- Name: Alarm archive is filled up to 60%; Text: The alarm archive is 60% full.
- Name: Camera out of order; Text: Camera out of order on digital recorder xy.
Save your settings.
7. Creating the storage process
Switch the view switch in the system configuration to the Database / Storage view (point 4)
and open the Storage processes point. Using the corresponding buttons, create a process
for “Activity detection”, “BGV pre-alarm”, “BGV alarm” and “Suspect”.
The images are now saved at a rate of 25 frames per second, a resolution of 4CIF and a
compression of 4 Mbit.
Save the settings.
The values set in the data saving processes are only valid as default for analogue
cameras. If you also want this to apply to IP cameras, go to the configuration, select
Miscellaneous

Various and enable the Set video parameters for IP cameras item.
Otherwise the settings for the IP camera made via the web interface apply.
8. Creating the hosts
Switch the view switch to the Network view (point 5) and select Hosts from the list on the
left.
Create a new host using the New button and give it a unique name. This makes it easier
to find the host afterwards.
Enter the number / IP address of the system where the notification is sent in the event of
an alarm and select the desired transmission path (ISDN, TCP/IP) in the Type field.
Save your settings.