ABUS TV3220 - Manual (Page 14)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 14
A slider is located below the date which switches the slides bar displayed underneath.
This tool can be used to switch the slides bar view between the Camera, Camera group,
Favourites, Connection map and Host view. This is described in more detail later in the
manual.
The slider to the left of it is for activating the sequencer. After activation, the live images
from all the cameras are shown in succession.
The system mode switch in the bottom left-hand corner switches the software to the
desired operating mode. The modes available are Live, LivePlus or Playback mode. This
is also described in more detail later in the manual.
The button for manual recording (Panic Record) can also be found next to the system
mode switch. This saves a recording of all the cameras currently shown. This occurs as
long as the button is activated.
The keyboard is used to select cameras, saved camera positions and to switch the set
relays. The control buttons below the LCD display switch between the different operating
methods. The current selection is shown directly in the LCD display.
(13)
Menu bar
Camera puck
Sequencer
Date / time
Slides bar
switch
Slides bar
Keyboard Joystick /
zoom
controller
Manual
recording
System status indicator
Live image
window
Geometry
tool
System
mode switch
Live /
LivePlus /
Playback
Create
favourites
Delete
favourites
Disconnect
host
LCD display
Connect host
CPU utilization indicator
Detector list
Start sequencer Stop sequencer