ABUS TV3220 User Manual
Page 145
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
145
Note:
The archive sizes of 450 MB and 2700 MB are suitable for a 4 MBit video stream. To save
higher bandwidths, especially HD cameras, the archive sizes must be modified
accordingly. From version 7.3.xxxx onwards, you can set the length of the pre-ring archive
in hours and minutes on the archive configuration page.
3. Switching the detectors
The following detectors are required for “BGV-Kassen” operation:
1. External Suspect
detector
2. External Alarm (robbery)
detector
3. Archive filled up to 60%/100%
virtual alarm detectors
4. Camera out of order
virtual alarm detector
5. Detector for activity detection
To set up the detectors, switch the view switch in the system configuration to the Digital
I/O view (point 2) and open the Detector/Key switch
TV33xx detectors point. Activate
two external detectors on the alarm card (e.g. TV3311) and designate them as “Alarm” or
“Suspect” (see diagram).
Switch to the Virtual alarm detectors point and activate the Alarm archive is filled up to
60% (detector 1), Alarm archive filled 100% (detector 2) and Camera out of order (detector
3) detectors. Save the settings.