ABUS TV3220 - Manual (Page 164)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 164
However, the ABUS VMS Professional version is required for setting up these cameras. An
overview of individual software packages can be found in the table under Upgrades at the start of
this manual.
10. What is the purpose of the “Apply” button?
When changes are made to the system configuration, the server module must be restarted in
order to apply the changes. The “Apply” button is used to restart the server.
11. How can I control a pan/tilt camera?
Pan/tilt cameras are controlled via RS-485 or RS-422. A special converter is needed to
communicate with the camera. This can be connected to the RS-232 or the USB port.
12. Which PTZ protocols are supported by the system?
The ABUS VMS software supports the following PTZ protocols:
13. I am automatically logged out of the system after a certain time. How can I
prevent this?
The “Auto Logout” function can be switched off in the system configuration. Switch the view switch
to the Security view (point 6) and select Auto Logout from the list on the left. Uncheck the
Automatic User Logout field and save your settings.
Baxall Fastrax II (HID-2404) Relais PTZ
BBV RS-422 Ganz PT Sensormatic TT / Ultra
Bewator/Molynx JVC TK-C676/655 Sony VISCA
CBC TOA Meridian (Marc Mercer) VCL Camera
CBC ZC-NAF27 Panasonic WV-RM 70 VCL MaxCom
Elbex EXC 80, 90, 1000 Pelco-D / -P Videotec
Ernitec BDR 510 Pieper KMS 850S Videv EC160