ABUS TV3220 - Manual (Page 138)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 138
3. Activating the detector for data recording
In order for data to be recorded, a detector is required, via which the recording is started. This
is how to set up the detector:
- Leave the view selector on Digital I/O and select Detectors / block locks in the list on
the left.
- In the subgroup, select the detectors for the POS Text Printer (e.g. POS text printer
COM3)
- Activate the detector until it displays the alarm symbol .
- Save the settings.
4. Setting up a camera for POS operation
Finally, you must select the camera to use for data recording.
- To do this, move the system configuration view selector to Camera view (item 1) and
select the camera (e.g. Cash register camera 2) on the left.
- Click Data. The window where you can select the detectors then appears. Select the
detector you activated in step 3 (e.g. POS Text Printer COM3 01).
- Save the settings and click Apply. The system then automatically creates all the other
necessary components and the POS setup is completed. You can then close the
system
configuration.
2. Select camera view
1. Select camera
4. Click Data
3. Select detector
5. Save and Apply the settings