ABUS TV3220 - Manual (Page 115)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 115
3.6.2 Creating a new user
Any number of users can be created in the ABUS VMS software. After they have been
created, the users must be assigned to an existing or previously created permission level.
1. The default user is admin; the password is 12345. For security reasons, this user should be
deleted after the initial set-up or replaced with a new user.
Ensure that at least one user with supervisor authorisation exists at all times, as complete
configuration of the system can only be made by these users.
Creating a new user:
1. Open the system configuration
2. Switch the view switch to the Security view
3. Select User from the list on the left
4. Click on the New button
5. Assign a name for the user
6. Assign a permission level to the user (see point 3.6.1)
7. Assign a log-in password for the user. Please note the optional use of
security guidelines (see point 3.6.3)
8. Activate the “Double Login” function (optional)
Creating a new user
Defining the user name
Defining the
permission level
Activating the “Double
Login” function
Creating the user
alarm
Defining the user password