ABUS TV3220 User Manual
Page 62
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
62
Note:
Recording after activity detection only takes place if the camera has been set up for it. For
further information on see section 3.4.2 on page 77.
To call up the mask configuration dialog, click Masks on the camera configuration screen in
the system configuration. However, the button is not enabled unless the checkbox in the
Activity detection (sensor settings) field is selected.
The motion masks are the permanent mask, the private zone mask and the adaptive mask.
The following sections describe these masks and how to use them.
The masks for Zone 1, Zone 2 and Zone 3 are for multiple zone alarms and are explained in
section 3.2.8.5 onward.
Preview image of the camera and mask marking area
Activity detection
configuration
Sensitivity of the
adaptive mask
Activate/deactivate
mask display and
show detected
movements
Selection of masks to mark out