ABUS TV3220 - Manual (Page 82)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 82
3.4.3.1 Setting up a “Guard Tour”
The following components are required for manual set-up:
1. An event which triggers the action (e.g. alarm detector)
2. A host to be called
3. The appropriate permission level for accessing the remote system
4. A process used to call the host and display the desired cameras
5. An activation to connect all the components together
1. Selecting the event:
Theoretically, each alarm detector on the system can be used as the event trigger.
These include external alarms, virtual alarms or simulation alarms.
Activate the desired detectors in the system configuration under Digital I/O (point 2)

Detector/Key switch and save the settings.
2. Setting up the host:
Switch the view switch in the system configuration to the Network view (point 5).
Under Hosts, create a new host and save the settings. For more details on creating
new hosts, see point 3.7.3.
3. Setting up the permission levels:
Switch to the Security view (point 6) and select Permissions.
Create a new permission level using New, then define the specific permissions. It is
important that the cameras used in the guard tour are also activated under
“Permissions”. For more details on permission levels, see point 3.6.1.
If you do not wish to work with permission level, then the standard “SuperVisor” level
can also be used. However, please note that each user with this permission level has
full access to all systems.
Save the settings.
4. Setting up a process:
Switch to the Actions view (point 3) and select Guard Tour.
Create a new process using the New button and give it a unique name.