ABUS TV3220 - Manual (Page 64)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 64
Once you have created the mask, click Close to quit the dialog and complete the process.
You can invert the mask if necessary by clicking Invert. This means that the masked area is
swapped with the non-masked area. Inversion always applies to the mask that is currently
selected (use the Tool slider).
3.2.8.2 Setting a privacy mask
Using a privacy mask, a certain section of the image is masked off, meaning this area is
blurred out in the live image.
The privacy mask is also created in the system configuration (does not apply to ABUS VMS
Basic).
To create the mask, proceed as detailed above under point 3.2.8.1, but use the middle mouse
key (scroll wheel) instead of the left mouse button.
In contrast to the permanent mask, a privacy mask is displayed in black. The masked section
of the image is then blurred out in the live image
The following illustrations show how to set up a private zone mask.
Setting up the mask Result in VMS
Setting the fourth corner point Setting the last corner point and
creating the mask
