Activating the rtsp server – ABUS TV3220 User Manual

Page 120

Advertising
background image

ABUS VMS

ABUS Security-Center GmbH & Co. KG

System manual

Version 7.3

120

3.7.2 Activating the RTSP server

By activating RTSP support (Real-Time Streaming Protocol), the system can be accessed
using the relevant terminal devices (RTSP clients, mobile phones etc.).

The bandwidth can be configured in the server module over two separate streams. The first
stream contains the video in full resolution. A bandwidth of up to 2 MB per stream is required
here.

The second stream is for low-bandwidth connections, such as mobile phones. Each stream is
restricted to 64 kbit. However, access using the second stream only applies to the connected
analogue cameras and not to the IP cameras.

Access control is made by the entered URLs, which are made up as follows:

1st camera

=

rtsp://Recorder-IP/camera1

(1st stream)

2nd camera

=

rtsp://Recorder-IP/camera2

(1st stream)

.
.

10th camera

=

rtsp://Recorder-IP/camera10

(1st stream)

If the second stream should be used, then .mobile should be added to the URL as follows:

1st camera

=

rtsp://Recorder-IP/camera1.mobile

(2nd stream)

The recorder IP must be adjusted according to the IP address of the recorder system.

Advertising
This manual is related to the following products: