ABUS TV3220 - Manual (Page 78)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 78
2. Activating the detector
Switch the view switch in the system configuration to the Digital I/O view (point 2) and open
the Detector/Key switch point.
If the system should record according to activity detection, then the TV33xx MD detector point
should be selected and the detector should be activated according to the camera number in
point 1 (camera 01 corresponds to MD detector 01). Switch the detector to the Detector state
( ) and save the settings.
If the system should record continuously, then the Virtual alarm detector point should be
selected and detector 20 should be activated (Permanent alarm). Switch the detector to the
Detector state ( ) and save the settings.
3. Creating a storage drive and archive:
Switch the view switch to the Database / Storage view (point 4) and open the Drives point.
Ensure that at least one drive is used for storage. See point 3.4.1 for more details. Save your
settings.
Create a new ring archive under Archives and give it a unique name and sufficient archive
size (see point 3.4.3). Save the settings.
4. Creating a storage process:
Switch the view switch to the Actions view (point 3) and open the Storage processes point.
Create a new storage process using the Activity monitoring or Continuous recording buttons
(see point 3.5.1). Save your settings.
5. Creating a timer:
If recording should only be made at certain times, then it can be set using a timer (see point
3.4.8 on side 96 : “Using timers”). Otherwise, use the standard Always timer.
6. Creating an activation:
The final step is the creation of an activation. All components detailed above are connected to
one another in this way. Only then is the system set up for recording.
Switch the view switch in the system configuration to the Actions view (point 3) and open the
Activations point. Using the New button, create a new activation with the following data:
Detector: Camera MD detector (activity detection) or permanent alarm (continuous
recording) (see step 2)
Camera: As required (see step 1)
Timer: Always or user-defined (see step 5)
Process: Created storage process (see step 4)
Archive: Created ring archive (see step 3)