ABUS TV3220 User Manual
Page 87
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
87
4. Activation of the camera:
This point can be skipped if the camera has already been set up in the system. If the
camera has not yet been set up, then switch to the Camera view and open the TV33xx
camera point. Select the desired camera and activate it by checking the On/Off box. More
information on configuring the camera can be found under point 3.2.
Save your settings.
5. Setting up the process:
Switch the view switch in the system configuration to the Actions view (point 3) and select
the Calling processes point.
Create a new process using the New button and give it a unique name.
Select the host from the list of available hosts by double-clicking it. The host is then
removed from the upper list and added to the lower list.
Select the permission level to be used. If no special permission level should be used,
then the standard
SuperVisor level can be used. However, please note that this permission level has full
access to all systems.
In order for the process to be completed, the Hold entire duration option must also be
selected. Otherwise, the process will be interrupted when an event occurs for a short
time.
From software version 6.8 onwards, you can change the receiver display when alarm
notifications arrive. A new area (Interface) was added to the call-up process.
The functions are described in detail in the following list.
Function
Description
Full-screen mode
Activates full-screen mode of the receiver when alarms occur
Show camera in 1Plus
Switches the current view of the receivers to the 1Plus view
and displays the alarm camera in the large window
Show camera exclusively
Deactivates the live cameras on the receiver and only display
the alarm camera in the single-image view
Max. connection time
The number of seconds after which the alarm is automatically
deactivated