ABUS TV3220 - Manual (Page 148)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 148
9. Setting up the calling process (alarm dialling)
Switch the view switch to the
Actions view (point 3) and select
the Calling processes point.
Using the New button, create a
new process according to the
figure on the right and select the
desired host from the host list by
double clicking it.
Save the settings.
10. Setting the activation
All components must be connected to one another before they can be started.
To do this, select the Activations point in the Actions view and create the new activations
using the New button with the following data:
Detector: Alarm; Status: OK; Timer: Always; Camera: Desk1; Process: BGV OK;
Priority: 3; Archive: Pre-ring
Detector: Alarm; Status: Alarm; Timer: Always; Camera: Desk1; Process: BGV Alarm;
Priority: 1; Archive: Alarm
Detector: Camera out of order; Status: Alarm; Timer: Always; Camera: None; Process:
Notification; Priority: 1; Archive: Camera out of order (notification text)
Detector: MD foyer; Status: Alarm; Timer: Always; Camera: Foyer; Process: Activity
detection; Priority: 3; Archive: Foyer Camera MD
Detector: Suspect; Status: Alarm; Timer: Always; Camera: Desk1; Process: Suspect;
Priority: 3; Archive: Suspect
Detector: Alarm archive is filled up to 60%; Status: Alarm; Timer: Always; Camera:
None; Process: Notification; Priority: 3; Archive: Alarm archive is filled up to 60%
(notification text)