ABUS TV3220 - Manual (Page 34)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 34
2.4.8 Using the alarm lists
The alarm lists help users to monitor detector activity. If an alarm list has been created in the
database settings, it can be linked to any detector. Every time a detector is triggered, an entry
is generated in the alarm list.
Configuration
To create an alarm list, open the system configuration and set the view selector to
Database/saving (see section 4).
In the list on the left, select Archive and click New to create a new archive.
Give the archive an unambiguous name and specify the required memory size.
Finally, select the archive type Alarm list and save the settings. The alarm list has been
created.
In order for entries to be generated in the alarm list, you must activate the required detectors
and link them to the alarm list using the Activations item. For more information see section 3.5
on page 102 and section 3.4.9 on page 98
Use
If an alarm list has been configured in the system, it
appears as a slide in the camera view. Like the cameras
and recordings, you can activate the alarm list using your
left mouse button (see section Fehler! Verweisquelle
konnte nicht gefunden werden. on page Fehler!
Textmarke nicht definiert.), by dragging it to a free
camera window.
Note, however, that the alarm lists can only be activated in
full-screen and list view playback mode.
If there is another free field below the camera window (in full-screen mode), the alarm list
always occupies two windows at the same time. This gives you a clearer view for evaluating
the entries. If not, it is only displayed in one window. Use the following illustrations for this.