ABUS TV3220 User Manual
Page 52
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
52
Setting up the colour settings:
Colour, brightness and contrast settings can also be set up individually for each
camera using the system configuration. To change the settings, use the Contrast /
colour...
button on the camera configuration page.
The parameters can then be
adjusted in the dialog which
follows.
Exit the dialog by pressing Close.
Setting an activity mask:
Press the Masks... button to use activity masks for the recording of individual
cameras. Please note that the button
is only activated when the Activity
Detection box is checked for the
camera.
Further details on using activity
masks
can
be
found
under
point 3.2.8.1 ff.
1.
Choose camera view
2.
Select camera
3.
Activate camera
Opening the colour settings
Opening the mask settings
Activating the activity detection