ABUS TV3220 - Manual (Page 29)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 29
2.4.2 Switching the image geometry
The ABUS VMS software has two tools to switch between camera views. The first of these is
the geometry tool and the second is the camera puck .
By changing the position of both tools
relative to each other, a total of 72
views in 4:3 and 72 views in 16:10 can
be displayed. The views are only
switched once the mouse button is
released.
The set view is saved when you exit the
software
and is automatically
reproduced when the software is next
started.
A more detailed description on how to
use these tools can be found below.
Working with the camera puck:
The camera puck is used to increase and decrease the
number of camera windows. For example, if more free camera
places are required, the puck must be moved along the
horizontal plane towards the plus sign (in quadratic view).
If the puck is moved along the vertical plane, the current view
is changed to the 1Plus view. The further the puck is now
moved away from the geometry tool, the larger the 1Plus
window.
If more free windows are required again, then these can be
created by moving the puck along the horizontal plane (+/-).
Camera puck
Geometry tool