ABUS TV3220 - Manual (Page 27)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 27
Pan/tilt camera
Pan/tilt camera with network connection
Network camera or video server
Analogue camera
The camera name and host name are always displayed at the bottom of the slide. It is
therefore very easy to assign the listed cameras to the relevant host.
If the camera is recording, the Record symbol appears in the slide.
Information on setting up further cameras can be found under 3.2 on page 51.
2.4.1 Activating and deactivating the cameras
Simply drag and drop a camera into a free live window to activate (switch on) the camera.
Switch the mode switch to Live mode (step 1).
Next, switch the view switch to the Camera view (step 2).
In the Camera view, click the slide of the camera and keep the left mouse button pressed.
Now move the mouse to a free camera window and release the left mouse button. The
camera is then embedded in the window (step 3).
If you wish to embed the camera in
another window, you can again use the
drag and drop function to move the
embedded live image to another window.
If an activated camera is moved to an
occupied window, then the cameras
swap positions on the screen.
If a camera from a camera list is
released over an occupied window, the
existing video image is replaced with the
image from the new camera.
1. Activate Live mode
2. Activate camera view
3. Activate camera (drag and drop)