ABUS TV3220 - Manual (Page 143)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 143
3.11.3 Setting up “UVV-Kassen” operation
The following components are required for the system set-up:
1. Cameras (foyer and cash desk area)
2. “Alarm”, “Pre-ring” and “Ring” archives
3. Alarm and suspect detectors
4. Permission level without delete authorisation
5. User account
6. Text message used in the event of an alarm
7. Storage process (suspect, activity, alarm, pre-alarm)
8. Host(s) where the notification is to be sent
9. Dialling process for alarms
10. Connection of the processes
11. Shell mode
The followin g steps show an example of a “UVV-Kassen” set-up with one camera in the foyer
and one in the cash desk area. The individual steps should be modified as needed if further
cameras are to be installed.
1. Switching on the camera
Move the view switch to Camera view (point 1) and open the Camera item in the list on the
left.
Select the number of the camera you wan t to use for “UVV Kassen” operation and activate
it by enabling the On/Off field.
If you want to use IP cameras, activate them as described in section 3.2.3.
Give the camera a unique name (e.g. POS 1) and save the settings.
Automatic configuration:
To activate “UVV Kassen” operation for the selected camera, click the BGV Alarm button.
You are then prompted to select a detector. Select the Alarm detector (detector from step
1). All other settings are then made automatically. Save the settings.
With HD-SDI or megapixel cameras, make sure that the archive is set large enough to
save 15 minutes’ worth of data.