ABUS TV3220 - Manual (Page 39)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 39
The default folder for the images is
the My Pictures folder. If you wish to
save to another location, you can
use the Browse button.
Click the Export button to start
exporting. The image is now saved
to the location selected and the
export dialog is closed again.
Repeat the above steps to export
further single frames.
Sending image data to a printer:
If you wish to send single frames to a printer, you only need to select printer export (point 4)
instead of the single frame export (point 1) in the export dialog.
If necessary, the printer can be changed
with the Printer setup button.
Click the Export button to send the image
to the printer.
If a printer has not yet been set up, the
Windows wizard appears for setting up a
new
printer. Follow the wizard’s
instructions for adding a new printer.
Otherwise, select the printer to be used
and click the OK button.
The image is now sent to the printer.
Note:
The operating system for the ABUS HDVR is on a CompactFlash card. The available memory
on the C:\ drive is therefore greatly reduced. When adding another printer, please only install
the printer drivers and not the image editing programs or printer management tools.
2. Select file type
4. Change file name and storage location if necessary
1. Select single frame export view
3. Activate “On screen display” (optional)
5. Start export