ABUS TV3220 - Manual (Page 56)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 56
- Open the system configuration and switch the view switch to the Camera view
(point 1) .
- Open the IP Camera menu point on the left-hand side.
- Select the camera number you wish to set up and activate this using the On/Off
field.
- Select the camera manufacturer in the Type selection field.
- The system then searches for all available IP cameras from the selected
manufacturer and displays the results in the URL/Port field. This process may take
some time.
Alternatively, you can enter the IP address and port of the camera manually
(e.g. 192.168.0.100:80).
- Click the “Selection” button to open the ABUS IP Installer, which allows you to
easily select the camera you want.
- If a user name or password has been configured for data access, then this should
be entered in the Administrator: or Password:
field. Click on “Detect” and wait until
the camera name has been updated.
- If you enter the access data correctly, you get a positive response.
- If the network camera supports audio, select the Audio checkbox so that audio
can be switched on and off in the live view.
- To apply the changes, click on the Save and Apply buttons in the last step.
Recordings can be made using activity detection or continuous recording as described under
point 3.4.2 on page 77.
If the IP camera is also equipped with a pan/tilt function, then this can be activated in the pan/tilt
section of the camera configuration. Proceed as detailed in point 3.3.2.