ABUS TV3220 - Manual (Page 45)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 45
If the connection has been successfully established, the software switches from the host view
to the camera view. The cameras of the host are now added to the list and can then be
activated in the same way as the local cameras.
If you want to disconnect from the remote station, you can do this by
clicking (Disconnect) in the Host view. To do this, first
highlight the host (the slide representing it) in the list and then click
Disconnect.
Hosts that are already connected appear on the host screen with a
host icon lit up.
For more information on connecting additional hosts, see section
3.7.3 on page 121.
2.7.1 Automatically redialing hosts after the connection is interrupted
If hosts are connected via the internet or DSL, the ISP (Internet Service Provider) may
sometimes automatically disconnect every 24 hours (DSL forced disconnection).
This disconnection also interrupts the
connections to the hosts.
The system therefore features an
automatic redial function for reconnecting
to the hosts within a defined period. You
can
set this up in the system
configuration under Network

Hosts.
Specify the number of automatic redial
attempts and the intervals between them.
Once you save and apply the settings,
the function is activated.
Note:
Automatic redialing must be set up separately for each host.
Because the IP addresses change after every forced disconnection, they have to be updated
each time in the host settings. We recommend replacing the IP addresses of the hosts with
what are known as DynDNS addresses. The update then takes place automatically.
Number of attempts to connect to the host
Interval between attempts
Non-connected
hosts
Connected
hosts