ABUS TV3220 - Manual (Page 121)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 121
3.7.3 Creating a new host
A host must first be entered in the host list before it can be called up. The host can then be
called up over LAN, DSL or ISDN.
To create a host, open the system configuration and switch the view switch to the Network
view.
Select Hosts from the list on the left and create a new host using the New button. Assign a
name to the host.
Note:
The maximum permissible number of hosts can be found in the table under “Upgrades” at the
start of this manual. If more hosts are required, then an upgrade must be made to the next
system version.
The call number must then be entered under Name. This can be a telephone number, IP
address, e-mail address or mobile phone number.
Select the corresponding transmission path according to the number. This is comprised of the
entered number or address.
To terminate the host connection automatically after a defined time, the desired time period in
minutes can be entered under Disconnect after:. The connection is not terminat
ed when “0” is
entered here.
1. Select the Network view
2. Select the Hosts menu point
3. Assign a name for the host
4. Assign a number/IP address
5. Select a connection type
6. Save the settings