ABUS TV3220 - Manual (Page 68)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 68
Setting up a camera group:
Open the system configuration
and set the view switch to the
Camera view.
Select Camera group from the list
on the left and create a new group
using the New button.
Assign a unique name for the
group.
Add the cameras from the camera
list (left column) to the newly
created group (right column) using
the Add
or Remove
buttons.
Save the settings and click on the Apply button.
The camera group is now available in the Camera group view on the user interface.
If one of these groups is dragged from the Camera group view on the user interface into the
live window, then the vacant live windows are filled with the cameras from this group. The set
image geometry is not changed here.
If more cameras are present in the group than can be displayed, then the remaining cameras
are ignored.
Deleting a camera group:
To delete a camera group, proceed as described above under Set-up, but select the Delete
button instead of the New button.
Note:
As camera groups may only be created by authorised users, they must be set up in the
system configuration. Alternatively, if the logged-in user is not authorised to access the system
configuration, then favourites may be used. For more details, see point 2.6 on page 41.
3.3 Database settings (Database / Storage)
The database settings are used to define the parameters for handling the available drives
and create database fields and archives.
Changes to the database settings can be made in the Database view in the system
configuration (point 4 -
“Database / Storage”).
Read through the following points carefully to gain an overview of all available setting
possibilities.
1. Select the Camera view
2. Choose the camera
group
4. Add the cameras
3. Create a new group
5. Save and apply