ABUS TV3220 - Manual (Page 44)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 44
2.7 Connecting to a host
You can connect to hosts over the Host view in the interface when hosts have already been
created in the system configuration.
To do this, switch the view switch to the Host view.
There are three different ways of connecting to a host. Connection is made in the following
circumstances:
1. When the host slide is dragged into the live image area (drag
and drop).
2. When the host slide is double-clicked.
3. When the host slide is selected and the Connect button is
clicked.
In each of these cases, the progress of the connection is shown in a dialog.
When the connection has been established correctly, the software switches from the Host
view to the Camera view. The cameras of the host are now added to the list and can be
activated in the same way as the local cameras.
To disconnect the host, press the button (Disconnect) in the Host view. To do this, first
select the desired host (host slide) from the list, then click on Disconnect.
Information on setting up other hosts can be found under point 3.7.3 on page 121.
Possibilities of connecting
hosts
1. Drag the host slide into the live window
2. Double-click the host slide
3. Select the host, then click on the Connect button.