ABUS TV3220 - Manual (Page 86)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 86
3.4.3.2 Setting up alarm dialling
The following components are required for the set-up:
1. An event which triggers the action (e.g. alarm detector)
2. A host where the notification is to be sent
3. The appropriate permission level for accessing the remote system
4. Activation of the camera
5. A call process used to notify the host and transmit the desired cameras
6. Creation of a message text
7. An activation to connect all the components together
1. Selecting the event:
Theoretically, each alarm detector on the system can be used as the event trigger. These
include external alarms, virtual alarms or simulation alarms.
Activate the desired detectors in the system configuration under Digital I/O (point 2)

Detector/Key switch and save the settings.
2. Setting up the host:
Switch the view switch in the system configuration to the Network view (point 5). Under
Hosts, create a new host and save the settings. For more details on creating new hosts,
see point 3.7.3.
3. Setting up the permission levels:
Switch to the Security view (point 6) and select Permissions.
Create a new permission level using New, then define the specific permissions. It is
important that the cameras used in the guard tour are also activated under “Permissions”.
For more details on permission levels, see point 3.6.1 on page 111.
If you do not wish to work with permission level, then the standard “SuperVisor” level can
also be used. However, please note that each user with this permission level has full
access to all systems.
Save the settings.