ABUS TV3220 - Manual (Page 94)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 94
Switch the view switch back to the Actions view (point 3) and select Activations from the list on
the left.
Create a new activation with the following data:
Detector: Permanent alarm; Timer: Always; Camera: None; Process: Video output process
as specified above; Priority: 3
You can find further information on creating activations under point 3.4.9 on page 98.
Save the settings and click on the Apply button.
The video output process is now set up. To set up further video outputs, repeat the steps
above for the corresponding video card.
Note:
A cross-card display of analogue video signals is possible on the ABUS HDVR. Each of the
video inputs can then be displayed on a video output.
3.4.7 Playing user-defined audio files in the event of an alarm
The ABUS VMS software allows you to play user-defined audio files in the event of an alarm.
Any alarm detector can be used for this.
This is of practical use when movement is detected. If an audio file is linked to the motion
detector of Camera 1, the file is played whenever movement is detected.
The steps required to set this up are described in more detail below.