ABUS TV3220 - Manual (Page 126)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 126
1. Setting up the e-mail account
A fully set up e-mail account is needed to send e-mails. If no e-mail account has been set
up, then this can be made over the Internet using a free e-mail provider. You will then
receive an e-mail address, user name, password and the addresses for sending (SMTP)
and receiving (POP3) e-mails. This data is then used in the software.
2. Activating the alarm detector
Switch to the Digital I/O

Detector/Key switch menu point and activate the detector used
to trigger the process.
3. Creating a receiver
Select Hosts, then create a new host using the New button. Specify a name and e-mail
ad
dress for the host. Select the “E-mail” connection type, then save your settings.
4. Setting up the dialling process
Access the Actions

Dialling menu point and add a new dialling process. Assign the
process a unique name and select the host (e-mail recipient) created earlier. Save your
settings.
5. Creating a notification text
Notification texts contain the actual message. This is then sent to the recipient by e-mail.
Access the Notifications point.Create a new notification with a message text, then save
your settings.
6. Creating a timer (optional)
To execute the complete process according to a user-defined timer, it must first be created
under Actions

Timers (see
Point 3.4.8). Alternatively, the “Always” timer can be used.
7. Setting the activation
Switch to Activations and create a new activation with the following data:
Detector: Alarm detector as required; Timer: Always or user-defined (step 7); Process:
Dialling process (step 5); Notification: Text (step 6).