ABUS TV3220 - Manual (Page 95)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 95
Adding audio files
To add the audio file, open the system configuration and move the view selector to item 3
(Processes). Then select Sounds from the list on the left.
Click New to create a new entry and select the audio file to use.
When it is successfully imported, the
message Sound file saved appears.
The file name is used as the default
name. However, to assign the sound
more clearly, it is advisable to give it a
name according to what it is used for.
Change the name as necessary in the
Name field and save the settings.
You can click Change sound to link
existing entries with new audio files.
Click Play sound to hear the currently
selected audio file.
Note:
The maximum size of the audio file is 1 MB. For recording audio files (.wav), you can use the
Windows Audio Recorder, for example.
Linking the audio file to a detector
After the audio files have been imported, you can link them to the detector that is currently
activated. Go from the Sounds item to Activations and click New to create a new activation.
Now choose the detector to be used for playing the audio file and click OK.
If the detector you want is not in the list, you may have to switch it on first. You can find an
overview of all the detectors that can be used and how they are activated in section 3.5 on
page 102.
Next go to the Camera/relay/audio columns and select None to make the Play sound process
appear in the Processes column. You must select this process as the process to be used.
Finally, you must link to the audio file to be
played when the process starts. You can
select it in the Sounds column.
Save the settings and click Apply. The
system is now configured for playing audio
files.
If you want to play other sounds, repeat the
above steps.