ABUS TV3220 - Manual (Page 31)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 31
Cameras
This means that the system can only switch to 2Plus mode if the first 1Plus window can fit next
to it again.
2.4.3 Using the zoomstick
The zoomstick on the lower right-hand edge of the screen is used to
control pan/tilt cameras.
This allows the direction of the cameras to be variably adjusted
(horizontally, vertically and diagonally).
However, only the camera currently selected can be directed in this way. This is shown by a
red frame in the live window.
To direct another camera, left-click that cam era’s live image in the live window section.
Alternatively, the camera can be selected with the numeric field. To do this, the number of the
camera to be activated must be entered.
The current image section can be enlarged by means of the zoom controller. If a pan/tilt
camera has been selected, the camera’s analogue zoom is used. With fixed cameras, the
image is zoomed in on digitally.
You can then move the enlarged section of the image using the arrow buttons.
2.4.4 Using the numeric field (keyboard)
The numeric field can be divided into four separate modes of operation. These are camera
selection, selection of pan/tilt presets (saved camera positions), selection of tours and relay
activation.
The current selection is shown in an LCD display.
The input mode can be changed
to two digits using the button. The
operator can therefore choose from up
to 99 entries.
You can call up tours 1 to 8 of analogue cameras by clicking the button. You can also
open and use the on-screen display (OSD) of each analogue camera.
The (Home) key moves the pan/tilt camera back to its starting position. This is
particularly useful if a camera has been moved and the operator no longer knows its starting
position.
Relays
Presets
LCD display
Home
Number keys
Two-digit
mode
Tours