Setting up an network camera – ABUS TV3220 User Manual
Page 55
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
55
3.2.3 Setting up an network camera
The ABUS VMS software supports all ABUS network cameras and is compatible with selected
models from other manufacturers (see the compatibility list
Additionally, video streams (generic RTSP) and individual image requests (generic JPEG) can
also be used. This means that the software can also be used with other third-party cameras.
A completely configured camera (user name, password and a valid IP address) is necessary
for successfully setting up an IP camera in the ABUS VMS software.
If this is not the case, configure your camera according to the camera documentation until
access over a web browser is possible.
Set-up steps:
3.
Activate the camera
4.
Select the type
5.
Enter/select the IP address
6.
Enter the user name and password (if necessary)
1.
Select the Camera view
2.
Select the IP camera