ABUS TV3220 - Manual (Page 38)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 38
2.5.3 Remote backup
The remote backup enables image data from a connected host to be backed up.
However, the host must be connected before the backup dialog is opened.
Switch the view switch on the client interface to the Host view and select a host (further
information on selecting hosts can be found under point 2.7 on page 44).
Now change to Playback mode and activate
the cameras of the host to be used for the
backup. Ensure also that no other cameras
are activated, otherwise they will be backed
up as well.
Perform all further steps as described under
point 2.5.1 (local backup).
A combination of cameras from the local
station and host is also possible.
2.5.4 Single frame export (storage, printing, e-mailing)
The single frame export can be used to save, print out and e-mail single frames from the
database or live image display.
If needed, the station name, camera name and date and time can be shown in the image
directly.
The possible settings available here are described in more detail below.
Storing single frames:
To export single frames, open the export dialog at the top left-hand edge of the screen in the
client interface and switch the export mode to Single frame export (point 1).
The image to be exported is now displayed as a preview.
Select the file type and check the “On screen display” box if the camera name, date and time
are to be contained in the exported image.
1. Activate host view
2. Connect to host
3. Activate Playback mode