ABUS TV3220 - Manual (Page 28)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 28
To deactivate (switch off) a camera, simply release the camera outside the chrome frame
using drag and drop. We recommend dragging the camera back to the slides list.
Camera groups or favourites can be
used to activate more than one camera
at the same time.
From version 7.3 onwards, you can reposition the individual slides using the drag and drop
method. Your individual user settings are saved each time you log off.
As well as this, you can activate a camera by double-clicking the corresponding slide.
Note:
Each camera can only be displayed once on the screen at all times. This applies to each
screen in multi-monitor operation. Depending on your particular version, a camera can be
displayed up to four times in Live mode.
If there are very many cameras in the list, the preview image on the slides may be disabled.
This is to provide a better overview when one receiver. for example, is connected to several
hosts.
To disable the preview image, right-click a slide in the list and select Preview in the context
menu. You can enable or disable the preview at any time using the context menu.
Chrome frame
Slide preview
on
Slide preview
off