Installing the web application, Accessing the web application – ABUS TV3220 User Manual
Page 153
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
153
4.3 Installing the web application
The web application can be installed according to the enclosed Quick Start guide. Always
install the software on the system where the main software is installed (ABUS VMS Basic,
Professional or Enterprise).
Insert the installation CD into the drive and wait until the start menu is loaded. Click on the
Install ABUS VMS web application menu point and follow the instructions in the set-up wizard.
In order for the application to function properly, you need at least the ABUS VMS Basic
software with a suitable video card (TVVR95000-TVVR95020) or ABUS HDVR.
For access to the web interface, you must first activate the web interface in the main software
as described in section 3.4.8.
Note:
The web application can not be used in combination with the ABUS VMS Express software.
4.4 Accessing the web application
After the web application has been installed successfully, the main software can be started
and the system can be accessed. Proceed as detailed in the following points.
Pay attention to the following table for later use. This gives an overview of the maximum
permissible number of connections to a system.
Testing the local connection:
Open the web browser on the local station and enter the following URL:
VMS Basic
VMS
Professional
VMS
Enterprise
ABUS
HDVR/NVR
Maximum
number of
parallel
connections
over the web
browser
1
3
3
3