ABUS TV3220 - Manual (Page 69)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 69
3.3.1 Setting the storage drives (drive settings)
The drive settings define how the drives connected to the system (CD writers, USB sticks
or removable drives) are used. The following options are available here:
- Operating system: This drive contains the operating system and may not be used for
storage
- No usage: Do not create any databases on this drive
- Storage: Use this drive for storage
- Backup read & write: Drive used for creating and reading backups
- Backup read: Backups may only be read on this drive
- Removable hard disk: This drive is run with read software when the system is shut
down so that the data can also be seen on other systems
When a drive is set up as a
storage drive, the entire storage
space is used. If only a part of
the storage space should be
used, then this can be restricted
using the Size to use: option.
Use the New button to add
further network drives to the
system.
Note:
In order to make a data backup (e.g. on CD/DVD or a USB stick), this drive must be
specified as a “Backup read & write” drive. Otherwise, this drive will not appear in the
drive list of the backup dialog.
Using the drives
Drive list
Setting of the size to be used
Adding further network drives