ABUS TV3220 User Manual
Page 99
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
99
Each activity is created according to the same procedure, which is laid out as follows:
To prevent incorrect configurations, activations must always be created according to this
procedure.
The following information describes the necessary steps for setting up and applying the
procedure in the software in more detail. However, this information only deals with the actual
creation of the activations. Consult the individual sections of this manual for more information
on setting up the components (processes, notifications etc.).
1.
Selecting the detector:
Open
the
system
configuration
and
switch the view switch
to the Actions view
(point
3).
Select
Activations from the
list on the left and
create
a
new
activation using the
New button. Select
the desired detector
from the list.
OK
Alarm
Which event
is used as
the trigger?
At which
state
should the
trigger be
made?
When
should
the trigger
be made?
What should
be used for the
trigger?
What should
happen during
the trigger?
Where should
storage be made /
which message
should be used?
Detector
State or
off
Timer
Camera /
relay /
nothing
Process
Archive /
notification /
nothing
3.
Create a new activation
1.
Select the Actions view
2.
Select the Activations menu point
4.
Select the detector