Setting up the ftp upload – ABUS TV3220 User Manual
Page 90
ABUS VMS
ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3
90
Save the changes and activate virtual alarm detectors 19 and 21 under Digital I/O
Detector/Key switch
Virtual alarm detector (see point 3.5 for more details).
If the check call should be controlled according to the time, then it must be connected to the
Permanent alarm detector (detector 20). When required, switch this on as well. Now create a
timer with the desired times. For more details, see point 3.4.8 on page 96.
Switch the view switch back to the Actions view. Select Activations from the list on the left.
Use the New button to create a new activation with the following data:
3.4.5 Setting up the FTP upload
Using the FTP upload, it is possible to send individual images from various cameras to an FTP
server within a specific time period. These images can then be displayed on an Internet site.
The following components are required for the set-up:
1. A camera where the images should be uploaded from
1.
Create a new activation
2.
Select the detector
3.
Set the status to alarm
4.
Select the timer
5.
Use no cameras
6.
Select the check call process
7.
Save and apply the settings