ABUS TV3220 - Manual (Page 66)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 66
You can see a graphical display during setup if
you select the checkbox in the Example object
size field.
You will then see a graphics showing the
current threshold object size in top left and
bottom right of the preview image. An alarm is
only triggered and the associated recording
process started when the actual object
reaches the size of the preview object.
When you have finished the configuration, click Close to quit the mask dialog and complete
the system configuration.
3.2.8.5 Using multiple-zone alarms
Multiple-zone alarms are used for starting various processes depending on the zone which
activity is detected in.
The zones are also created in the mask dialog, which you can open by clicking Masks in the
camera configuration dialog. (See section 3.2.1 on page 51)
The ABUS VMS software allows you to use up to three zones at the same time. The
illustration below shows a configuration with three zones.
Zone 1
Object size display
Zone 2
Zone 3