ABUS TV3220 - Manual (Page 80)

ABUS VMS ABUS Security-Center GmbH & Co. KG
System manual
Version 7.3 80
3.4.3 Alarm dialling
In the event of an alarm, there are two different types of image transmission in the ABUS VMS
software. These are “Guard Tour” and “Alarm Dialling”.
Guard Tour:
In this mode, the client software dials into the corresponding recorder and displays the desired
cameras. The process is triggered by an event on the client PC (e.g. an external alarm).
For example, if a recorder monitors a three-storey building with five cameras, then the
ca
meras can be set up as a “virtual tour” on the client PC. Cameras 1 and 2 show the first
floor, cameras 3 and 4 show the second floor and camera 5 shows the third floor. These are
shown one after another before they are disconnected. The following diagram shows the
functions as a flow chart.
Event Guard Tour
Image presentation Determining
the image data
Remote system
dial-up
Client
PC
Show
camera 1
1st floor
Show
camera 2
2nd floor
3rd floor
Show
camera 3
Show
camera 4
Show
camera 5
End
(disconnect)
Event