Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 109
Setup Menu
108
AFR Minimum Value
This setting should be the Air Fuel Ratio that corresponds to the AFR Minimum voltage.
The Valid Range is 0.0 to 24.0 in .1 increments.
Access from the Controller:
From the
Main screen
, press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the AFR
Setup Menu selection is highlighted, and then press the “ENTER” button. Press the down arrow until the "AFR
Min Value" selection is highlighted and then press the "ENTER" button. Use the “LEFT” and ”RIGHT” arrow
buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC” button to exit
with no change.
Access from the Computer Program:
From the
Status screen
, press the "Setup" button. The "AFR Minimum Value" setting is found in the "AFR Input
Setup" dialog box under the "Air Fuel Ratio" Tab. Click the "UP" and "DOWN" arrow buttons or type in any
numeric value in the valid ranges shown above.
AFR Maximum Value
This setting should be the Air Fuel Ratio that corresponds to the AFR Maximum voltage.
The Valid Range is 0.0 to 24.0 in .1 increments.
Access from the Controller:
From the
Main screen
, press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the AFR