Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 145
User Program Files, Data Logs, and Other Software Options
144
After the upload is complete, the user will be prompted to erase the data log from the controller, as shown
below.
Open Data Log from File
This option allows the user to view a data log that is saved on the computer.
Access from the Computer Program:
There are two (2) ways to open a saved data log, denoted below by the bullet points.
•
From the
Status screen
, press the "DATA" button. The "Open" option is found in the "Data Log File" dialog
box under the "Options" tab.
•
From the
Status screen
, click on the "Open Data Log from File" button in the toolbar on the upper left-hand
side of the window, as shown below.
If the user has an unsaved data log currently being viewed on the computer, the computer program will prompt
the user to save the data log before opening the saved data log. Then, a windows explorer window will pop up
and prompt the user to select the desired file. Once the desired file is selected, click "Open" to open the data
log or "Cancel" to terminate the operation.