Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 151)

User Program Files, Data Logs, and Other Software Options 150
The chart can be easily zoomed in or out in two (2) ways. To zoom in or out on a specific point in time, simply
move the vertical blue line to the time location and use the scroll wheel on your computer mouse to zoom in or
out. You can also use the green rectangle below the X-axis by clicking and dragging the ends of the rectangle
to zoom the chart. The ends of the green rectangle show the range of the zoomed charts with respect to the full
length of the chart, so if the entire time span of the chart is being displayed, the green rectangle will span the
entire length of the graph as well. This can be seen in the previous illustration as that chart was zoomed out
completely. Notice in the following illustration how the green rectangle and the tick marks on the X-axis show
that the chart has been zoomed in.
Viewing a Specific Time Interval
The data log chart can be zoomed to a specific time interval by first placing the vertical blue line on either the
beginning or the end time of the desired time interval. Then, double click on the vertical blue line. Your cursor
will now be dragging a highlighted region on the chart, as shown in the first picture below. Drag the highlighted
region of the chart to the other end of the desired interval and single click to zoom in to the desired interval. The
second picture below shows the time interval from 1 second mark to the 6 second mark.