Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 82)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 81
“DOWN” arrow button repeatedly until the "Resume Start Percent" menu selection is highlighted and then press
the “ENTER” button. Using the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button
to accept the new setting or press the “ESC” button to exit with no change.
Access from the Computer Program:
From the
Status screen , select the stage by pressing either the "Nitrous1" button or the "Nitrous2" button. The
"Nitrous Resume %" setting is found in the "Nitrous Resume Ramp" dialog box under the "Options" Tab. Click
the "UP" and "DOWN" arrow buttons or type in any numeric value in the valid ranges shown above.
See Appendix B: Nitrous & Fuel Operation for more information.
6.12 Resume Percent Per Pulse
This setting determines the rate at which the Nitrous Resumes if the user lifts the throttle during Arming. This
setting is used with the Resume Start Percent to build a Resume Ramp. This allows the user to adjust how
quick the Nitrous comes back on if one of the activation criteria is removed, causing the system to deactivate.
Valid Range is 10% to 50% in 1% increments.
Access from the Controller:
From the
Main screen , select the stage by pressing either the "N2O-1" button or the "N2O-2" button. Press the
“DOWN” arrow button repeatedly until the "Resume % Per Pulse" menu selection is highlighted and then press
the “ENTER” button. Using the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button
to accept the new setting or press the “ESC” button to exit with no change.
Access from the Computer Program:
From the
Status screen , select the stage by pressing either the "Nitrous1" button or the "Nitrous2" button. The
"Resume % Per Pulse" setting is found in the "Nitrous Resume Ramp" dialog box under the "Options" Tab.
Click the "UP" and "DOWN" arrow buttons or type in any numeric value in the valid ranges shown above.