Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 67)

Global Menu / Setup-Options 66
You MUST have a PC/laptop equipped with a USB port and the proper software installed to update the controller
software image.
Access from the Controller:
From the
Main screen , press the “Global” button. Press the “DOWN” arrow button repeatedly until the "Update
Software" menu selection is highlighted and then press the “ENTER” button. Press the “YES”, “NO”, or
“CANCEL” button to change the current selection. If the “NO” or “CANCEL” button is pressed no change will be
made.
5.12 Display Contrast
Use this Setting to adjust the LCD Display contrast. This setting is only available on the NCC-002 controller.
Access from the Controller:
From the
Main screen , press the “GLOBAL” button. Press the “DOWN” arrow button repeatedly until the
"Display Contrast" menu selection is highlighted and then press the “ENTER” button. Using the “LEFT” and
”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to accept the new setting or press the “ESC”
button to exit with no change.
5.13 About NCC-002
This selection displays the current firmware version and the software build date.
Access from the Controller:
From the
Main screen press the “GLOBAL” button, press the “DOWN” arrow button repeatedly until the "About"
menu selection is highlighted and then press the “ENTER” button. Press the “BACK” button to exit.
Access from the Computer Program:
From the
Status screen , click on the "Help" button in the top toolbar. The current software version will be