Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual
Page 139
User Program Files, Data Logs, and Other Software Options
138
•
From the
Status screen
, click on the "Open User Program File" button in the toolbar on the upper left-hand
side of the window, as shown below.
Regardless of which method you used to open the "Open User Program File" window, the computer program
should display the following window for the user to browse the computer to find the desired user program file
(.NCD). Once the user has selected the desired program, click "Open" to open the highlighted user program file
or click "Cancel" to terminate the operation. NOTE: If you have made changes to the current program and
have not saved them, you will be prompted to save the current program.
Save User Program File
This option allows the user to save a user program file to the computer that was either created in the computer
program or flashed from the controller.
Access from the Computer Program:
There are three (3) ways to save a User Program File, denoted below by the bullet points.